I first met Madelyn “Maddie” Parlier in the “clean room” of Standard Motor Products’ fuel-injector assembly line in Greenville, South Carolina. Like everyone else, she was wearing a blue lab coat and a hairnet. She’s so small that she seemed swallowed up by all the protective gear.Daneplast Limited UK are plastic injection mould & toolmaking specialists.
Tony Scalzitti, the plant manager, was giving me the grand tour, explaining how bits of metal move through a series of machines to become precision fuel injectors. Maddie, hunched forward and moving quickly from one machine to another, almost bumped into us, then shifted left and darted away. Tony, in passing, said, “She’s new. She’s one of our most promising Level 1s.”
Later, I sat down with Maddie in a quiet factory office where nobody needs to wear protective gear. Without the hairnet and lab coat, she is a pretty, intense woman, 22 years old, with bright blue eyes that seemed to bore into me as she talked, as fast as she could, about her life.Get information on Air purifier from the unbiased, She told me how much she likes her job, because she hates to sit still and there’s always something going on in the factory. She enjoys learning, she said, and she’s learned how to run a lot of the different machines.A mold or molds is a hollowed-out block that is filled with a liquid like plastic, At one point, she looked around the office and said she’d really like to work there one day, helping to design parts rather than stamping them out. She said she’s noticed that robotic arms and other machines seem to keep replacing people on the factory floor, and she’s worried that this could happen to her. She told me she wants to go back to school—as her parents and grandparents keep telling her to do—but she is a single mother, and she can’t leave her two kids alone at night while she takes classes.
I had come to Greenville to better understand what, exactly, is happening to manufacturing in the United States, and what the future holds for people like Maddie—people who still make physical things for a living and, more broadly, people (as many as 40 million adults in the U.S.) who lack higher education, but are striving for a middle-class life. We do still make things here, even though many people don’t believe me when I tell them that. Depending on which stats you believe, the United States is either the No. 1 or No. 2 manufacturer in the world (China may have surpassed us in the past year or two). Whatever the country’s current rank, its manufacturing output continues to grow strongly; in the past decade alone, output from American factories, adjusted for inflation, has risen by a third.
Yet the success of American manufacturers has come at a cost. Factories have replaced millions of workers with machines. Even if you know the rough outline of this story, looking at the Bureau of Labor Statistics data is still shocking. A historical chart of U.S. manufacturing employment shows steady growth from the end of the Depression until the early 1980s, when the number of jobs drops a little. Then things stay largely flat until about 1999. After that, the numbers simply collapse. In the 10 years ending in 2009, factories shed workers so fast that they erased almost all the gains of the previous 70 years; roughly one out of every three manufacturing jobs—about 6 million in total—disappeared. About as many people work in manufacturing now as did at the end of the Depression, even though the American population is more than twice as large today.
I came here to find answers to questions that arise from the data.Offering high risk and offshore merchant account with credit card processing services. How, exactly, have some American manufacturers continued to survive, and even thrive,Spro Tech has been a plastic module & Mold Maker, as global competition has intensified? What, if anything, should be done to halt the collapse of manufacturing employment? And what does the disappearance of factory work mean for the rest of us?
Across America, many factory floors look radically different than they did 20 years ago: far fewer people, far more high-tech machines, and entirely different demands on the workers who remain. The still-unfolding story of manufacturing’s transformation is, in many respects, that of our economic age. It’s a story with much good news for the nation as a whole. But it’s also one that is decidedly less inclusive than the story of the 20th century, with a less certain role for people like Maddie Parlier, who struggle or are unlucky early in life.
Tony Scalzitti, the plant manager, was giving me the grand tour, explaining how bits of metal move through a series of machines to become precision fuel injectors. Maddie, hunched forward and moving quickly from one machine to another, almost bumped into us, then shifted left and darted away. Tony, in passing, said, “She’s new. She’s one of our most promising Level 1s.”
Later, I sat down with Maddie in a quiet factory office where nobody needs to wear protective gear. Without the hairnet and lab coat, she is a pretty, intense woman, 22 years old, with bright blue eyes that seemed to bore into me as she talked, as fast as she could, about her life.Get information on Air purifier from the unbiased, She told me how much she likes her job, because she hates to sit still and there’s always something going on in the factory. She enjoys learning, she said, and she’s learned how to run a lot of the different machines.A mold or molds is a hollowed-out block that is filled with a liquid like plastic, At one point, she looked around the office and said she’d really like to work there one day, helping to design parts rather than stamping them out. She said she’s noticed that robotic arms and other machines seem to keep replacing people on the factory floor, and she’s worried that this could happen to her. She told me she wants to go back to school—as her parents and grandparents keep telling her to do—but she is a single mother, and she can’t leave her two kids alone at night while she takes classes.
I had come to Greenville to better understand what, exactly, is happening to manufacturing in the United States, and what the future holds for people like Maddie—people who still make physical things for a living and, more broadly, people (as many as 40 million adults in the U.S.) who lack higher education, but are striving for a middle-class life. We do still make things here, even though many people don’t believe me when I tell them that. Depending on which stats you believe, the United States is either the No. 1 or No. 2 manufacturer in the world (China may have surpassed us in the past year or two). Whatever the country’s current rank, its manufacturing output continues to grow strongly; in the past decade alone, output from American factories, adjusted for inflation, has risen by a third.
Yet the success of American manufacturers has come at a cost. Factories have replaced millions of workers with machines. Even if you know the rough outline of this story, looking at the Bureau of Labor Statistics data is still shocking. A historical chart of U.S. manufacturing employment shows steady growth from the end of the Depression until the early 1980s, when the number of jobs drops a little. Then things stay largely flat until about 1999. After that, the numbers simply collapse. In the 10 years ending in 2009, factories shed workers so fast that they erased almost all the gains of the previous 70 years; roughly one out of every three manufacturing jobs—about 6 million in total—disappeared. About as many people work in manufacturing now as did at the end of the Depression, even though the American population is more than twice as large today.
I came here to find answers to questions that arise from the data.Offering high risk and offshore merchant account with credit card processing services. How, exactly, have some American manufacturers continued to survive, and even thrive,Spro Tech has been a plastic module & Mold Maker, as global competition has intensified? What, if anything, should be done to halt the collapse of manufacturing employment? And what does the disappearance of factory work mean for the rest of us?
Across America, many factory floors look radically different than they did 20 years ago: far fewer people, far more high-tech machines, and entirely different demands on the workers who remain. The still-unfolding story of manufacturing’s transformation is, in many respects, that of our economic age. It’s a story with much good news for the nation as a whole. But it’s also one that is decidedly less inclusive than the story of the 20th century, with a less certain role for people like Maddie Parlier, who struggle or are unlucky early in life.
沒有留言:
張貼留言